REDCON 2.4G 9CH CM921 DSM2 DSMX Receiver CM921S Satellite Spektrum JR Compatible – Black

Features:
The CM921 is composed of an internal and an external receiver, using dual channel radio frequency hopping technology
Compatible with all the Spektrum and JR 2.4G transmitter
Support the default type all channel protection function
Wireless simulator interface( W.D.S.C ), support REFLEXTR, G3, G4, G5 fly simulator
D.S.C function has been canceled for the more stable version

Brand Name: REDCON
Item Name: CM921 + CM921S receiver satellite
Band: 2.4G
Channel: 9CH
Material: Plastic
Modulation: DSM2 / DSMX
Dimension: 50 x 30 x 13mm
Weight: 36g
Voltage: 4-10V

Binding Procedure:
Step 1. Put the binding harness into the connector location marked BIND. Next, apply power to the receiver. Both receiver and satellite LED’s should illuminate.

Step 2. To set fail-safe throttle and control surface positions, ( minimum throttle with and all control surfaces set to neutral is suggested ).  Press the bind button ( LED will illuminate ). Turn on the transmitter.

Step 3. The receiver LED will change from rapid flashing to slow flashing and a few seconds later when binding is accomplished the LED of both satellite and central receiver will illuminate solid. All fail-safes should be programmed correctly now.

Step 4. Remove the binding harness from the BIND channel.  Restart the receiver by cycling its power off and back on.  All tracks should function properly now.  You may test fail-safe by holding sticks in the corner, and cycling the transmitter off.  Surfaces and throttle should return to your preset fail-safe positions set in.

General Notes:
Only one bind procedure is required on a new receiver. The repetitive binding provides no extra security.  Always remember to remove the binding harness after the successful bind is completed.