1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output;
3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface
9. Micro SD recording flight data;
Specifications:
Microprocessor
1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
2. frequency: 168MHZ, 256K RAM
3.32 STM32F103 backup coprocessor
Sensor
1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5611 precision barometer
Interface
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External MICRO USB Interface
Packing list: (full set as your choose)
Pixhawk 2.4.8 32bit ARM Flight Controller x 1
anti-vibration Shock Absorber Board x1
Safety button and buzzer x 1
RGB x 1
4G card (IO firmware has written) x 1
Neo-M8N Gps Module x 1
Black Gps Holder x 1
Power Module x 1 ( yellow and black color XT60 connector PM send at random)
Minim OSD w/ shell x 1 ( 2 kind of OSD cable send at random)
I2C Splitter Expand Module x 1
PPM Module w/ shell x 1
433/915 MHZ telemetry x 1 ( send as your choice)
6pin turn 6pin cable x 1
4pin turn 4pin cable x 1
3pin DuPont line x 1
Base kit Pixhawk 2.4.8 package included:
Pixhawk 2.4.8 32bit ARM Flight Controllerx 1
Safety buttonx 1
Buzzer x 1
4G card x1
RGB with Shell x1
PPM wth shell X1
I2C with shell X1
Shock Absorber x1
Power module x 1
Cables
Reviews
There are no reviews yet.